Semicircular Quartz Boat

Semicircular Quartz Boat
Details:
A Semicircular Quartz Boat is made by cutting a fused quartz tube in half along its length and closing the ends. Its curved bottom follows the inside of the furnace tube, so it slides smoothly and uses the full tube width. Battery and catalyst producers, material labs and furnace users choose the Semicircular Quartz Boat for powder calcination, CVD sources and annealing because it is simple, sturdy and economical.
Send Inquiry
Description
Send Inquiry

A Semicircular Quartz Boat is made by cutting a fused quartz tube in half along its length and closing the ends. Its curved bottom follows the inside of the furnace tube, so it slides smoothly and uses the full tube width. Battery and catalyst producers, material labs and furnace users choose the Semicircular Quartz Boat for powder calcination, CVD sources and annealing because it is simple, sturdy and economical.

 

Features

Fits the tube 

curved bottom matches the furnace tube radius.

01

Smooth sliding 

easy to push in and pull out.

02

Economical 

made from tube, so cost stays low even for long boats.

03

Clean fused quartz 

high purity for powders and films.

04

End options 

open ends, closed ends or end walls with notches.

 

05

 

Types

 

  • Half round quartz boat with closed ends
  • Half tube quartz boat for long sample lines
  • Semi cylindrical quartz boat with a flat ground bottom
  • U shaped quartz boat with taller sides
  • Half cylinder quartz boat with hook or rod

 

Typical Sizes

 

Tube OD used

Boat width

Length

20 mm

about 18 mm

50 – 150 mm

30 mm

about 26 mm

80 – 200 mm

50 mm

about 40 mm

100 – 300 mm

80 mm

about 65 mm

100 – 400 mm

Boat width is chosen to fit your furnace tube with a small gap for gas flow. Tell us the tube inner diameter and the length you need.

 

Typical Uses

 

In CVD of 2D materials, half round boats hold precursor powders such as sulfur or selenium. In battery material labs they hold cathode powders for calcination. In general labs they serve as simple carriers for annealing small samples.

 

FAQ About Semicircular Quartz Boat

 

Q: Can the boat have a flat bottom?

A: Yes. The outside can be ground flat so the boat sits steady on a table.

Q: Can you make very long boats?

A: Yes, long boats are cut from long tubes and can be supplied with support rods.

Bulk Supply

We supply boats in sets of matching sizes for labs and in bulk for distributors and production lines.

Ordering Tip

Measure the inner diameter of your furnace tube and tell us the length of the hot zone. We will cut the boat from tubing that leaves a small gap for gas flow and make it short enough to stay inside the uniform temperature zone, which gives more consistent results for every batch.

Every Semicircular Quartz Boat is inspected under our ISO 9001:2015 quality system.

Hot Tags: semicircular quartz boat, China semicircular quartz boat manufacturers, suppliers, factory, double handle quartz boat, fused quartz boat, quartz boat, Quartz Boat For Tube Furnace, quartz glass boat, quartz sample boat

Send Inquiry