A Thin Fused Quartz Plate is a fused quartz sheet typically 1 mm thick or less, ground and polished on both sides. It is used where a part must be light, thin and transparent while still resisting heat and chemicals: substrates for thin films, cover slips for UV microscopy, sensor windows and spacers. Our Thin Fused Quartz Plate products are made from 99.99% SiO2 quartz or synthetic fused silica.
Features
Very thin
from about 0.1 mm to 1 mm thickness.
01
Double side polished
smooth, transparent surfaces for optics and coatings.
02
Flat and parallel
controlled thickness variation for substrates and windows.
03
UV transparent
a thin fused silica plate transmits deep UV with low absorption.
04
Heat resistant
no softening or warping at normal processing temperatures.
05
Applications
- Substrates for thin film deposition, coating and sputtering
- UV microscope cover slips and slides
- Sensor and detector windows
- Spacers and insulators in electronics and MEMS
- Ultra thin quartz glass for spectroscopy cells
Popular Thicknesses
|
Thickness |
Typical size |
Use |
|
0.1 – 0.3 mm |
Small squares and discs |
Cover slips, sensors |
|
0.5mm quartz plate |
Up to about 100 × 100 mm |
Substrates, windows |
|
0.8 – 1 mm |
Up to about 200 × 200 mm |
Coating substrates, spacers |
A thin quartz glass sheet can be supplied in standard squares such as 10 × 10, 20 × 20, 25 × 25 and 50 × 50 mm, or cut to custom shapes with laser or diamond tools.
Handling Thin Quartz Plates
Very thin plates can break if bent or dropped. We pack them in clean cassettes or interleaved boxes, and we recommend handling them with plastic tweezers. For coating customers we can deliver plates cleaned and packed in clean-room bags.
FAQ About Thin Fused Quartz Plate
Q: What is the thinnest quartz plate you can make?
A: Plates down to about 0.1 mm can be produced in small sizes. Thicker plates allow larger sizes.
Q: Can thin plates be cut into circles?
A: Yes. We can cut discs and special shapes from thin plates.
Supply for Coating and Electronics Companies
Thin plates are often bought in hundreds or thousands for coating runs, sensor assembly or microscopy kits. We cut them to identical sizes from the same material lot, check thickness on every batch and keep the specification on file, so repeat orders match the first delivery. Edges can be chamfered to reduce chipping in automatic handling.
Every Thin Fused Quartz Plate is checked for thickness, flatness and surface defects under our ISO 9001:2015 system.
Hot Tags: thin fused quartz plate, China thin fused quartz plate manufacturers, suppliers, factory, bent quartz plate, drilled quartz plate, quartz flange ring, quartz glass panel, quartz glass sheet, quartz plate with slots

