A Quartz Disc with Center Hole is a round fused quartz disc drilled through the middle so a rod, tube, shaft, lamp or sensor can pass through it. It is used as a mounting washer, an end cap, a spacer or a heat shield in lamps, furnaces, analyzers and vacuum equipment. Our Quartz Disc with Center Hole parts are cut and drilled from 99.99% SiO2 quartz with the hole centered precisely on the disc.
Features
Concentric hole
accurate centering for rotating shafts and lamp mounts.
01
Clean edges
ground and chamfered holes reduce chipping and stress.
02
Heat resistant
suitable for lamp ends and furnace caps.
03
Insulating
electrically insulates wires and electrodes passing through.
04
Flexible design
extra mounting holes, steps or slots are possible.
05
Applications
- Quartz disc with hole as lamp end caps and spacers
- Drilled quartz disc for furnace tube end covers with gas or thermocouple ports
- Round quartz plate with hole for rotating sample stages
- Quartz round plate with center hole for UV sensors and optics mounts
- Quartz perforated disc for gas distribution with a central feed
Typical Dimensions
|
Disc diameter |
Center hole |
Thickness |
|
10 – 30 mm |
2 – 15 mm |
1 – 5 mm |
|
30 – 100 mm |
5 – 50 mm |
2 – 10 mm |
|
100 – 300 mm |
To drawing |
3 – 20 mm |
The disc can be polished for optical use or left ground for thermal parts. We can add several holes in a circle around the center hole for screws or gas flow.
Washer vs Ring
When the hole is small compared with the disc, the part works like a washer or cover; when the hole is large, it becomes a ring. We produce both, so you can choose the right proportion for strength and weight.
FAQ About Quartz Disc with Center Hole
Q: What tolerance can you hold on the center hole?
A: Precision drilling and grinding allow close tolerances. Please mark the required tolerance on your drawing.
Q: Can the hole be threaded?
A: Glass threads are not recommended in thin discs; we can add a stepped hole for a clamp or nut instead.
Typical Industries
Lamp and heater makers use center-hole discs to hold filaments and electrodes, analyzer manufacturers use them as end caps for combustion tubes, and laboratories use them as covers for furnace tubes with a port for a thermocouple. Each use needs a different hole size and finish, so every order is made to the customer's drawing rather than from a fixed catalog.
All discs are inspected under our ISO 9001:2015 quality system. Send your drawing for a quote on your Quartz Disc with Center Hole.
Hot Tags: quartz disc with center hole, China quartz disc with center hole manufacturers, suppliers, factory, AR coated quartz window, Fused Quartz Window, IR fused silica window, quartz level gauge glass, round quartz plate, UV fused silica window

