Quartz Furnace Tube

Quartz Furnace Tube
Details:
The Quartz Furnace Tube is the work tube of a tube furnace: it holds the sample, carries the gas flow and keeps the heating elements clean. Furnace manufacturers, materials companies, battery and catalyst producers and research labs use our Quartz Furnace Tube for annealing, sintering, calcination and CVD under air, inert gas or vacuum. Each tube is made from 99.99% SiO2 fused quartz and cut with square, ground ends ready for vacuum flanges.
Send Inquiry
Description
Send Inquiry

The Quartz Furnace Tube is the work tube of a tube furnace: it holds the sample, carries the gas flow and keeps the heating elements clean. Furnace manufacturers, materials companies, battery and catalyst producers and research labs use our Quartz Furnace Tube for annealing, sintering, calcination and CVD under air, inert gas or vacuum. Each tube is made from 99.99% SiO2 fused quartz and cut with square, ground ends ready for vacuum flanges.

 

Why Choose Our Quartz Tube for Tube Furnace

Flange-ready ends

ends are ground flat and square, so stainless steel sealing flanges seal properly.

 

 

 

 

01

Correct OD tolerance –m wall

outer diameter is controlled to fit standard flanges and furnace openings.

02

Clean material

no contamination of powders, films or wafers at high temperature.

03

Thermal shock resistance

safe for fast heating and cooling programs.

04

Easy to see

a clear tube lets you watch the sample and boat position during the run.

05

 

Typical Processes

 

  • Annealing and heat treatment of metals and thin films
  • Calcination and sintering of battery materials and catalysts
  • CVD growth of graphene, carbon nanotubes and 2D materials
  • Inert or reducing gas treatment and vacuum drying
  • Quartz reaction tube for gas-solid reactions

 

Quartz Furnace Tube Sizes

 

Furnace size

Outer diameter

Common length

1 inch quartz furnace tube

25 mm

600 mm – 1000 mm

2 inch quartz tube

50 mm

1000 mm – 1400 mm

3 inch

80 mm

1000 mm – 1400 mm

4 inch

100 mm

1000 mm – 1500 mm

6 inch – 12 inch

150 mm – 300 mm

To drawing

Every split tube furnace quartz tube we make is checked against the furnace opening, and we supply tubes that fit split tube furnaces, single and multi-zone furnaces, rotary tube furnaces and vertical furnaces. Tell us your furnace model or the flange size, heating length and required tube length, and we will match the lab furnace quartz tube to your system. Matching quartz plugs, boats and stainless steel vacuum flanges are also available.

 

How to Extend Furnace Tube Life

 

  • Keep the hot zone at or below about 1100 °C for long runs, and avoid alkali contamination that causes devitrification.
  • Use quartz plugs at both ends to reduce heat loss and protect the flange seals.
  • Heat and cool gradually, especially for large diameter tubes.

 

FAQ About Quartz Furnace Tube

 

Q: Will your tube fit my split tube furnace?

A: In most cases yes. Send us the furnace model or the flange inner diameter and the overall length, and we will confirm the size.

Q: Can a quartz tube furnace work under vacuum?

A: Yes. With proper sealing flanges, our tubes are used under vacuum at high temperature. For temperatures above about 1100 °C we recommend an alumina furnace tube.
We are an ISO 9001:2015 certified manufacturer supplying furnace makers and end users worldwide. Contact us for a quote on your Quartz Furnace Tube, from single replacements to OEM volumes.

Hot Tags: quartz furnace tube, China quartz furnace tube manufacturers, suppliers, factory, quartz catalytic combustion tube, Quartz Furnace Tube, quartz reaction tube, quartz reactor tube, quartz reduction tube, quartz tubular reactor

Send Inquiry