A Tube Furnace Quartz Plug is placed inside the furnace tube between the hot zone and the end flange. It blocks radiant heat, keeps the temperature in the heating zone more uniform and protects the O-rings of the vacuum flange from overheating. Each Tube Furnace Quartz Plug is made of fused quartz with an internal filling or frosted surfaces that stop heat radiation, plus a handle so it can be pushed and pulled easily.
Features
Heat shielding
reduces heat flow to the ends of the tube and to the flange seals.
01
Better temperature uniformity
a more stable hot zone for annealing and CVD.
02
Gas flow friendly
plug diameter leaves a small gap so gas can flow around it.
03
Clean material
fused quartz does not contaminate samples at high temperature.
04
Easy handling
fused handle or hook for loading and unloading.
05
Types
- Quartz furnace plug with frosted or sandblasted faces
- Quartz thermal block filled with quartz wool or quartz pieces
- Tube furnace insulation plug for long tubes, used in pairs
- Quartz tube cap and quartz tube plug for short tubes and storage
- Quartz tube end plug with gas through-hole or thermocouple hole
Sizes
|
Furnace tube OD |
Plug diameter |
Plug length |
|
25 mm |
about 20 mm |
50 – 100 mm |
|
50 mm |
about 42 mm |
80 – 150 mm |
|
80 mm – 100 mm |
to tube ID |
100 – 200 mm |
|
150 mm – 300 mm |
to tube ID |
To drawing |
Please tell us the inner diameter of your furnace tube. We machine the plug outer diameter to leave the right gap for gas flow, and we supply plugs in pairs for each tube.
Why Use Plugs in a Tube Furnace
Without plugs, heat radiates along the tube to the cold ends, causing a larger temperature gradient and overheating the flange seals. Many furnace manuals recommend placing plugs on both sides of the hot zone, especially above about 800 °C and under vacuum.
FAQ About Tube Furnace Quartz Plug
Q: Should I use quartz or alumina plugs?
A: Quartz plugs suit quartz tubes up to about 1100 °C. For higher temperature work in alumina tubes, use alumina furnace plugs.
Q: How many plugs do I need?
A: Normally two per tube, one on each side of the heating zone.
Our Tube Furnace Quartz Plug products are made under ISO 9001:2015 procedures and supplied to furnace makers and end users.
Hot Tags: tube furnace quartz plug, China tube furnace quartz plug manufacturers, suppliers, factory, quartz tube plug, tube furnace insulation plug, Tube Furnace Quartz Plug

