A Fused Quartz Rod is a solid bar of high purity fused quartz used for structural, thermal and optical parts that must survive high temperature and harsh chemicals. Semiconductor and solar equipment makers use a Fused Quartz Rod for wafer boat rails and supports, lamp makers use it for lamp parts, and machine builders cut it into pins, spacers and light guides. Our rods are made from 99.99% SiO2 quartz in diameters from 1 mm to about 100 mm.
Features of Clear Fused Quartz Rod
High purity
no metal contamination in wafer and high purity processes.
01
High temperature
rigid at about 1100 °C, softening only near 1680 °C.
02
Optical transparency
a transparent quartz rod transmits UV, visible and near infrared light.
03
Low expansion
stays straight and dimensionally stable during heating.
04
Easy to machine
cut, ground, drilled or fused to quartz tubes and plates.
05
Applications
- Rails and supports for semiconductor wafer boats and carriers
- Fused silica rod pins, spacers and insulators in furnaces
- Light guides and optical rods in UV and IR systems
- Stirring rods and laboratory tools
- Drilled quartz rod parts for sensors, nozzles and lamps
Popular Diameters
|
Diameter |
Typical length |
Common use |
|
1 – 5 mm |
Up to 1000 mm |
Pins, small light guides, lamp parts |
|
6 – 10mm quartz rod |
Up to 1500 mm |
Supports, stirring rods |
|
12 – 20mm quartz rod |
Up to 1500 mm |
Wafer boat rails, structural parts |
|
25 – 100 mm |
To drawing |
Large supports, optical blanks |
Rods are supplied in stock lengths or cut to size. Ends can be cut, ground flat, fire polished, chamfered or rounded, and we can grind flats, slots and grooves for wafer carriers.
Why Quartz Rods in High-Tech Production
In diffusion and annealing furnaces, every part near the wafers must be clean and stable. Quartz rods do not release metal ions, do not rust and keep their shape over many cycles, which is why wafer boats and holders are built from them. The same properties make them reliable in UV and chemical equipment.
FAQ About Fused Quartz Rod
Q: Can you drill holes in quartz rods?
A: Yes. We drill axial or cross holes in rods to make nozzles, pins and holders.
Q: Do you keep rods in stock?
A: Common diameters such as 5, 10, 15 and 20 mm are in stock; other sizes are made to order.
Every Fused Quartz Rod is inspected for diameter, straightness and bubbles under our ISO 9001:2015 quality system. Contact us for standard rods or machined parts.
Hot Tags: fused quartz rod, China fused quartz rod manufacturers, suppliers, factory, 20mm quartz rod, chamfered quartz rod, fused silica rod, heavy quartz rod, quartz light pipe, transparent quartz rod

