Polished Quartz Rod

Polished Quartz Rod
Details:
A Polished Quartz Rod is a fused quartz rod finished to a higher standard than a normal cut rod. Its ends, its outer surface or both are ground and polished so that light passes cleanly through the end faces, or so that the diameter is precise enough for tight-fitting assemblies. Optics and laser companies, sensor makers and precision equipment builders use a Polished Quartz Rod where a standard rod would not be accurate or clear enough.
Send Inquiry
Description
Send Inquiry

A Polished Quartz Rod is a fused quartz rod finished to a higher standard than a normal cut rod. Its ends, its outer surface or both are ground and polished so that light passes cleanly through the end faces, or so that the diameter is precise enough for tight-fitting assemblies. Optics and laser companies, sensor makers and precision equipment builders use a Polished Quartz Rod where a standard rod would not be accurate or clear enough.

 

Finishing Options

Polished end quartz rod

both end faces optically polished for light coupling.

01

Precision ground quartz rod 

outer diameter ground to tight tolerance.

02

Fire polished quartz rod

flame finished surface and rounded ends, low cost and smooth.

03

Chamfered quartz rod

edges chamfered to prevent chipping in assemblies.

04

Optically polished quartz rod

both cylinder and ends polished for maximum clarity.

 

05

 

Applications

 

  • Light guides and homogenizers in UV curing and illumination
  • Sensor rods and optical probes
  • Precision pins, shafts and alignment parts
  • Laser beam delivery and test optics
  • Viewing rods for furnace and process monitoring

 

Specifications

 

Item

Typical range

Diameter

1 mm – 100 mm

Length

3 mm – 1000 mm

End polishing

Optical polish, flat and perpendicular

Diameter tolerance

Tight tolerance on precision ground rods

Tell us which surfaces need polishing and the tolerances required. We can supply synthetic fused silica rods for deep UV light guides.

 

Polishing Increases Performance

 

A cut rod scatters light at its rough ends, and an unground rod may vary in diameter along its length. Polishing the ends improves light coupling efficiency, while precision grinding guarantees fit in bores and holders. Choosing only the finishing that your application needs keeps the price reasonable.

 

FAQ About Polished Quartz Rod

 

 

Q: Can only one end be polished?

A: Yes. Either one or both ends can be polished.

Q: What flatness can you achieve on the end faces?

A: Optical polishing gives flat, clear faces suitable for light coupling; please state your flatness requirement.

Typical Customers

Our polished rods go to UV curing system makers, medical light device manufacturers, sensor companies and research labs that build optical setups. Many of them order a small trial batch with different finishes to compare performance, then standardize on one specification for production.

Each Polished Quartz Rod is inspected under our ISO 9001:2015 quality system before shipping.

Hot Tags: polished quartz rod, China polished quartz rod manufacturers, suppliers, factory, chamfered quartz rod, fused silica rod, Quartz Glass Rod, quartz stir rod, quartz stirring paddle, transparent quartz rod

Send Inquiry