Maintenance Of Quartz Glass Tubes

Jun 16, 2026

Leave a message

Daily Use and Maintenance
Avoid Thermal Shock: Prevent sudden temperature changes; do not expose the quartz tube to cold water or cold air while it is hot. Temperature adjustments should be gradual to prevent cracking caused by thermal stress.
Prevent Impact Damage: Wear clean gloves and handle the tube gently to avoid impacts from hard objects, which could cause invisible micro-cracks. Do not apply excessive force or uneven pressure during installation.
Regular Inspections: Check the tube before and after each use for cracks, deformation, or surface devitrification. Discontinue use immediately if any abnormalities are found to prevent further damage.

 

Cleaning and Maintenance Procedures
Routine Cleaning: Wipe the tube surface in a single direction using a soft, lint-free cloth dampened with anhydrous ethanol or deionized water to remove dust and ordinary stains. Avoid abrasive cleaners that could scratch the tube wall.
Deep Cleaning: For stubborn stains, soak the tube in an acetic acid or ethanol solution combined with ultrasonic cleaning for 30–60 minutes, then rinse thoroughly with deionized water. In specific cases, a brief soak in low-concentration hydrofluoric acid may be used, provided proper ventilation and safety precautions are maintained.
Special Usage Requirements: When using a tube furnace, do not place materials directly inside the tube; use a crucible to hold the material to prevent residual substances from reacting with the SiO₂ and corroding the tube wall.

Send Inquiry